Skip to content
CalContractorPrep
Menu

CSLB General Building (B) practice questions: Transportation and traffic control

Section 5 of 5: Safety

4 free practice questions on transportation and traffic control, part of a section that is about 15% of the General Building exam. Try each one, then open the answer: every choice is explained, and the answer names the code section or public rule it comes from.

Questions and answers

  1. 1. Under Cal/OSHA, what must happen before a worker is assigned as a flagger?

    Safety

    • A. The worker must be trained in the fundamentals of flagging, and the training must be documented
    • B. Nothing, if the worker has a driver's license
    • C. The worker must be at least 21 years old
    • D. The worker must hold a Caltrans flagger license
    Show answer

    Correct answer: A

    • A. The worker must be trained in the fundamentals of flagging, and the training must be documented

      Correct answer

      Correct: documented flagger training before assignment (section 1599).

    • B. Nothing, if the worker has a driver's license

      Wrong: a driver's license is not flagger training.

    • C. The worker must be at least 21 years old

      Wrong: section 1599 sets no age requirement.

    • D. The worker must hold a Caltrans flagger license

      Wrong: section 1599 calls for training, not a Caltrans license.

    Explanation

    Title 8 section 1599 requires flaggers to be trained in the fundamentals of flagging moving traffic before being assigned as flaggers, with the training documented.

  2. 2. A flagger controls a one-lane, two-way work zone. Under the California MUTCD, how long should the taper be?

    Safety

    • A. 10 to 25 feet
    • B. 50 to 100 feet
    • C. 200 to 300 feet
    • D. The full merging taper length L
    Show answer

    Correct answer: B

    • A. 10 to 25 feet

      Wrong: too short.

    • B. 50 to 100 feet

      Correct answer

      Correct: 50 to 100 feet (6B.08).

    • C. 200 to 300 feet

      Wrong: too long.

    • D. The full merging taper length L

      Wrong: a full merging taper is for closing a lane, not for a one-lane two-way taper.

    Explanation

    California MUTCD section 6B.08 sets the taper for a one-lane, two-way (flagger-controlled) section, like a downstream taper, at 50 feet minimum and 100 feet maximum, with channelizing devices about 20 feet apart.

  3. 3. A 12-foot lane is closed on a highway with a posted speed of 50 mph. Using the California MUTCD formula, what is the minimum length of the merging taper?

    Safety

    • A. 300 feet
    • B. 500 feet
    • C. 600 feet
    • D. 720 feet
    Show answer

    Correct answer: C

    • A. 300 feet

      Wrong: this is half of L, the shifting taper.

    • B. 500 feet

      Wrong: this uses W x S x S / 60, the formula for 40 mph or less.

    • C. 600 feet

      Correct answer

      Correct: 12 x 50 = 600 feet.

    • D. 720 feet

      Wrong: this uses 60 mph instead of the posted 50 mph.

    Explanation

    California MUTCD section 6B.08: for speeds of 45 mph or more, L = W x S. L = 12 x 50 = 600 feet.

  4. 4. A temporary ROAD WORK AHEAD sign is mounted at the roadside on a residential street where people park and walk. Under the California MUTCD, the bottom of the sign must be at least how high above the top of the curb (or, where there is no curb, the near edge of the traveled way)?

    Safety

    • A. 1 foot
    • B. 3 feet
    • C. 5 feet
    • D. 7 feet
    Show answer

    Correct answer: D

    • A. 1 foot

      Wrong: 1 foot applies only to signs on barricades or other portable supports.

    • B. 3 feet

      Wrong: below the minimum.

    • C. 5 feet

      Wrong: 5 feet is the rural minimum.

    • D. 7 feet

      Correct answer

      Correct: 7 feet in residential areas with parking or pedestrians (6F.02).

    Explanation

    California MUTCD section 6F.02 requires roadside temporary traffic control signs in business, commercial or residential areas where parking or pedestrians are likely to have the bottom at least 7 feet above the top of the curb (or the near edge of the traveled way where there is no curb). In rural areas the minimum is 5 feet above the near edge of the pavement. Signs on barricades or other portable supports must be at least 1 foot above the traveled way.

Keep studying

Read the Section 5 study notes: Safety

All General Building topics

Study guides for this section

Test yourself

Try 25 free General Building practice questions from all five sections. Each answer explains the rule and names the code section it comes from. No sign-up.

See what the General Building exam covers