Skip to content
CalContractorPrep
Menu

CSLB General Building (B) practice questions: Cabinetry and millwork

Section 4 of 5: Finish Trades

4 free practice questions on cabinetry and millwork, part of a section that is about 20% of the General Building exam. Try each one, then open the answer: every choice is explained, and the answer names the code section or public rule it comes from.

Questions and answers

  1. 1. Storage shelves in a public building's accessible storage cabinet are reached from the front with no obstruction. What is the highest the reach range may go?

    Finish Trades

    • A. 48 inches
    • B. 52 inches
    • C. 54 inches
    • D. 60 inches
    Show answer

    Correct answer: A

    • A. 48 inches

      Correct answer

      Correct: 48 inches is the maximum high forward reach.

    • B. 52 inches

      Above the maximum reach.

    • C. 54 inches

      Above the maximum reach.

    • D. 60 inches

      Above the maximum reach.

    Explanation

    California Building Code section 11B-308.2.1 sets the unobstructed forward reach range at 48 inches maximum high and 15 inches minimum low above the finish floor.

  2. 2. Shelving inside the closets of a new home is made of particleboard. What formaldehyde limit must the particleboard meet under CALGreen Table 4.504.5?

    Finish Trades

    • A. 0.05 parts per million
    • B. 0.09 parts per million
    • C. 0.11 parts per million
    • D. 0.13 parts per million
    Show answer

    Correct answer: B

    • A. 0.05 parts per million

      0.05 ppm is the limit for hardwood plywood (veneer or composite core).

    • B. 0.09 parts per million

      Correct answer

      Correct: particleboard is limited to 0.09 ppm.

    • C. 0.11 parts per million

      0.11 ppm is the limit for standard medium density fiberboard.

    • D. 0.13 parts per million

      0.13 ppm is the limit for thin MDF (5/16 inch or less).

    Explanation

    CALGreen section 4.504.5 requires hardwood plywood, particleboard and medium density fiberboard to meet the Air Resources Board formaldehyde limits in Table 4.504.5. Particleboard is limited to 0.09 ppm.

  3. 3. A mirror is installed above the vanity countertop in an accessible public restroom. The bottom of the reflecting surface may be at most how high above the floor?

    Finish Trades

    • A. 35 inches
    • B. 38 inches
    • C. 40 inches
    • D. 44 inches
    Show answer

    Correct answer: C

    • A. 35 inches

      35 inches is the limit for a mirror that is not above a lavatory or countertop.

    • B. 38 inches

      38 inches is not the code value.

    • C. 40 inches

      Correct answer

      Correct: 40 inches maximum for a mirror above a lavatory or countertop.

    • D. 44 inches

      44 inches is the maximum height of a usable medicine cabinet shelf, not a mirror.

    Explanation

    CBC section 11B-603.3 requires a mirror above a lavatory or countertop to have the bottom edge of its reflecting surface no more than 40 inches above the finish floor. A mirror that is not above a lavatory or countertop is limited to 35 inches.

  4. 4. A U-shaped kitchen with a range, enclosed on three sides, must meet the accessible kitchen rules of the California Building Code. What is the minimum clearance between the opposing base cabinets?

    Finish Trades

    • A. 36 inches
    • B. 40 inches
    • C. 48 inches
    • D. 60 inches
    Show answer

    Correct answer: D

    • A. 36 inches

      36 inches is less than either kitchen clearance in 11B-804.2.

    • B. 40 inches

      40 inches is the minimum for a pass-through kitchen, not a U-shaped one.

    • C. 48 inches

      48 inches is the long side of a 30 by 48 inch clear floor space, not the U-shaped kitchen clearance.

    • D. 60 inches

      Correct answer

      Correct: a U-shaped kitchen needs at least 60 inches between opposing elements.

    Explanation

    CBC section 11B-804.2 requires at least 60 inches of clearance between all opposing base cabinets, countertops, appliances or walls in a U-shaped kitchen enclosed on three contiguous sides. A pass-through kitchen needs 40 inches and two entries.

Keep studying

Read the Section 4 study notes: Finish Trades

All General Building topics

Test yourself

Try 25 free General Building practice questions from all five sections. Each answer explains the rule and names the code section it comes from. No sign-up.

See what the General Building exam covers